C50 Transformer and Bushing Monitor
The C50 Transformer and Bushing Monitor makes condition monitoring easy and affordable. It looks at the condition of your assets so that you can use real-time data to make decisions about your high voltage transformers.
The C50 Monitors
- Bushing Health
- Power Factor and Capacitance
- Partial Discharge
- On Load Tap Changers
- Internal and Ambient Temperatures
- Multi-gas DGA
- Cooling System
Did you know that 50% of bushing failures end in fires? The C50 Transformer and Bushing Monitor provides real-time bushing data during all weather conditions, loads, and at rated voltage, with the same sensitivity as an offline measurement.
Ease of Configuration
The configuration process is streamlined to ensure you only spend time configuring functions and settings that are relevant to your application. You can copy configurations from other C50s you’ve programmed, allowing for easy large-scale deployment. It tracks, stores and reports installed firmware revision levels.
Integrates with Third Party Devices
The C50 interfaces with third party devices such as multi-gas DGA monitors to consolidate all critical operating data for viewing and analysis at a single point.
Review Real Time Data
The built-in dashboard provides real-time data to track system status and alarms, no software tool required. With the C50 Transformer and Bushing Monitor, you can view data history, and configure responses and reactions to changing conditions of your asset.
If immediate response is required, please directly contact your local Dynamic Ratings location:
+1 262 746 1230 x3
+61 3 9574 7722
+44 1617 681111
For all other requests, please fill out the contact form below: