LIVE WEBINAR
Asset Maintenance Strategies: Turning Test Data and Online Monitoring into Condition-Based Maintenance
February 9 & 10, 2027
Time-based maintenance often means spending money on equipment that doesn’t need attention while still missing failures as they develop. A condition-based approach puts resources where the equipment condition calls for them, but only when offline test results and online monitoring data are combined and turned into decisions.
This webinar shows how to combine periodic offline testing, such as dissolved gas analysis, power factor, and insulation testing, with continuous online monitoring to build a fuller picture of asset health. Attendees will learn how offline results can set a baseline and add context to online trends, and how online data can show when an extra offline test is needed.
A large part of the session covers alarm management. We’ll go over best practices for setting alarm thresholds and rate-of-change limits that catch problems early without overwhelming staff with nuisance alarms. In this webinar you will learn about:
- Setting alarm levels from asset-specific baselines rather than generic defaults
- Using trend and rate-of-change alarms, not only fixed thresholds
- Revisiting alarm settings as equipment ages and operating conditions change
Attendees will leave with a practical approach to optimizing alarm settings, so incipient faults are flagged early, while there’s still time to plan an intervention instead of reacting to an outage.

